home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d7
/
commo45.arc
/
COMMO.CFG
< prev
next >
Wrap
Text File
|
1991-01-11
|
5KB
|
124 lines
┌────────────────────┐
│ Configuration File │
└────────────────────┘
Configuration items must be enclosed in curly braces and must all be
present in the order shown. The file is otherwise "free form." See
COMMO.DOC for details on each item.
Items marked with a "*" may be changed for the current session using
the Internal Editor. Others are checked only at startup and are
usually controlled by key commands or macros during a session.
┌──────────────────┐
│Terminal and Modem│
└──────────────────┘
1 * {2400,8n1,1} Default Serial Port Parameters: Speed, Format, Port #
2 * {A} Default Terminal-Type (Ansi-bbs/Vt102/Tty)
3 * {0} Default Inter-Character Delay (0-999)
4 * {no} Drop DTR and RTS on exit (yes/no)
5 * {yes} Software (XON/XOFF) Flow Control (yes/no)
6 * {no} Hardware (RTS/CTS) Flow Control (yes/no)
7 * {AT S0=0 S7=90 E0 Q0 V1 X4 &C1 &D2 |}
Modem Initialization String (see COMMO.DOC)
8 * {.z.,^xB00} Auto Receive, Zmodem
9 * {.m.,^v^h^vMPt} Auto Receive, MPt
10 * {.m.,^v^h^vPuma} Auto Receive, Puma
11 * {} Auto Receive
12 * {} Com1 Port address and IRQ overrides.
13 * {} Com2 These are normally left blank.
14 * {} Com3 Refer to COMMO.DOC for
15 * {} Com4 important details.
┌───────┐
│Dialing│
└───────┘
16 {no} Start with AutoBaud Detect on (yes/no)
17 * {yes} Clear dialing marks when saving directory (yes/no)
18 * {45} Dialing cycle time limit (seconds)
19 * {2} Delay between dialing attempts (seconds)
20 * {CONNECT} Dialing success response(s)
21 * {BUSY,NO CARRIER,NO DIALTONE} Dialing failure response(s)
22 * {ATDT} Dial Prefix #1 (default) see Online Help
23 * {} Dial Prefix #2
24 * {} Dial Prefix #3
25 * {} Dial Prefix #4
26 * {|} Dial Suffix
┌───────────────┐
│Paths and Files│
└───────────────┘
27 * {c:\commo} Path to find uploads
28 * {c:\commo} Path to place downloads
29 {c:\commo\commo.cap} Pathname for initial Capture File
30 {c:\commo\commo.scn} Pathname for initial Screen Image file
31 * {c:\commo\commo.log} Pathname for Usage Log file
┌────────────┐
│ASCII Upload│
└────────────┘
32 * {yes} Expand blank lines (yes/no)
33 * {yes} Strip outgoing linefeeds (yes/no)
34 {} Startup pacing character
┌─────────────┐
│Miscellaneous│
└─────────────┘
35 {no} Default to Dialing Directory on startup (yes/no)
36 {no} Start with Local Echo on (yes/no)
37 {no} Start with Signal Lights on (yes/no)
38 {no} Start with Capture File open (yes/no)
39 {screen} Startup Capture File mode (screen/filter/raw)
40 * {no} Test for enhanced keyboard (yes/no)
41 * {yes} Display time of day with System Name (yes/no)
┌──────┐
│Sounds│
└──────┘
42 {yes} Start with Master Sound on (yes/no)
43 * {yes} Dialing connection alarm (yes/no)
44 * {yes} ASCII Upload finished alarm (yes/no)
45 * {3} Maximum number of alarm rings (0-999)
┌───────────────────┐
│Video and Chat Mode│
└───────────────────┘
46 {10} Scrollback Buffer size in kilobytes (0-64)
47 * {no} Snow checking on CGA adapter (yes/no)
48 * {yes} Use BIOS for Terminal Screen scrolling (yes/no)
49 * {no} Use BIOS for Terminal Screen output (yes/no)
50 {no} Get the number of screen rows from DOS (yes/no)
51 * {18} Number of lines in upper Chat Mode window
52 * {no} Send when Enter is pressed in Chat Mode (yes/no)
┌──────┐
│Colors│
└──────┘
Press F10 to display the color chart.
Then press any key to return to editing.
53 * {no} Enable mono attributes (yes/no)
(See COMMO.DOC)
54 * {07} Terminal screen colors
55 * {17} File window text colors
56 * {70} File window border colors
57 * {4f} File window selector bar colors
58 * {70} Small window text colors
59 * {17} Small window border colors
60 * {17} Status line colors